ABAY ELECTRIC MOTOR and RELATED EXPERIMENT PROVES FREE-MAGNETIC ENERGY IN MAGNETS

https://youtu.be/aMt3GDC2R9E Purpose of the 2nd Video/Part 2: The Abay type electric motor can make both axial and radial magnetic interactions at the same time in a single winding with a different winding technique.  As can be understood from the Turkish Patent Institute examination reports, it is unique in the world in this form.  With this different winding technique, it has reached and even slightly exceeded the 93% efficiency value, which is the highest value in IE5 Ultra Premium 2 horsepower motors, which is the most efficient motor class in the world, by showing 94-95% efficiency values ​​even with its iron-free coreless model.  However, it is predicted that these efficiency values ​​will increase even more when the upper model with an iron-containing core is made, which is understood to be possible in an industrial environment.  Here, in Chapter 2, sample motor efficiency measurements were made live as evidence and the efficiency measurement tec...

https://youtu.be/JS4J2BTRL_U Purpose of the 1st Video/Part 1: Abay type electric motor, which is at the prototype stage and will be placed in a single body by reducing its dimensions by almost half due to the removal of unused spaces in the industrial type can interact with  axial and radial magnetic interaction in a single winding with a different winding technique that completely surrounds the rotor.  As can be understood from the Turkish Patent Institute examination reports, it is unique in the world with this form.  With this different winding technique, it has reached and even slightly exceeded the 93% efficiency value, which is the highest value in IE5 Ultra Premium 2 horsepower motors, which is the most efficient motor class in the world, by showing 94-95% efficiency values ​​even with its iron-free coreless model. However, it is predicted that these efficiency values ​​will increase even more when the upper model with an iron-containing core is made, w...

https://youtu.be/-ce0HT1CyCw?si=6lbwhNHQgrl_3pt5 F) CONTROL EXPERIMENT In order to avoid errors, it is useful to first conduct a CONTROL EXPERIMENT in which we will measure in the same environment and in the same way as our actual experience: The purpose of conducting a control experiment is to observe that the energy gained without permanent magnet movement is less than the electrical energy given before the actual experiment, to see if the experimental setup and resistance values are adjusted correctly. For this purpose, first of all, we cut off the current by opening the switch and closing the switch after touching in order to find the approximate wave duration that we will include in the measurement in the experiment that we will do in a moment, and by the method we described, we found that the time elapsed until the magnet touched the coil winding was 114 ms. We will use this period from the opening of the switch to the time the magnet touches the coil winding in terms...

 HOW CAN WE CALCULATE AND FORMULIZE THIS EXTRA ENERGY? In summary, the energy conversion in permanent magnet electric motors is actually as follows: Given Electrical energy   + Magnetic energy provided in the rate of change in interaction strenght from permanent magnets interacting with electromagnetic waves formed in electromagnets with given electrical energy      =        Mechanical energy obtained + Coil heat losses and other motor losses + Electromagnetic sourced electromagnetic energy interacting with the outside of the system (motor) , not helping to the rotation of the motor In line with all the explanations, it is concluded that the extra magnetic energy released in permanent magnets, which will increase the total energy of the observable system in supraatomic dimension, is proportional to the amount of change in the interaction strenght between the magnets. Magnetic Energy (Magnetic) α Change in Interaction Strenght The Chang...

 WHAT ARE THE REASONS THAT THE EXTRA RELEASED ENERGY ACTUALLY CANNOT BE OBSERVED IN OTHER ELECTRIC MOTORS WORKING WITH PERMANENT MAGNETS TODAY, EVEN  THEY PROVIDE LESS AMOUNT?    DISCUSSION As it is known from thermodynamics and other laws of physics, there cannot be a machine more efficient than one hundred percent, and it is not possible to gain energy from nothing, so after the results of the experiment, it has been determined that the only source of the extra energy is the permanent magnets which interact with the electromagnets in the motor. Here are the r easons why the extra released energy, which we can observe here, is actually less amount but cannot be observed in other electric motors working with permanent magnets today: 1-Because of the lack of a design that will provide a good enough interaction between the electromagnet formed by the electrical energy we give to the motor and permanent magnet:   In the motor of our experiment, a design was ...

  W HY DON'T THE MAGNETIC MOTOR THAT WE CALL AS INFINITE ENERGY AND THE ELECTRIC MOTOR-GENERATOR SYSTEMS WHICH TURN EACHOTHER WORK? (ALL THINGS ON SOCIAL MEDIA ARE  FAKE.. ) PERPETUAL MACHINE SYSTEM WITH PERMANENT MAGNETS -MAGNETIC MOTORS: Before my hypothesis was finalized, I studied on motors, also called perpetual machine or magnetic motors, that could only work with the mechanical energy that can be provided after the magnetic energy conversion in permanent magnets with related close experiments. I continued my studies by observing practically and trying to overcome this problem, that repulsion causes the system to move continuously with a decreasing force as the distance increases, and atraction causes the system to remain immobil in such a way that the two interacting poles remain in the strongest and therefore nearest position. I have designed some machines in such a way that the repulsion force of the movable rotor part along the motion path by the stator is more tha...