Part 3: LET'S PROVE THAT EXTRA ENERGY CAN BE OBTAINED FROM MAGNETS BY ADDING THE MOTOR LOSSES


https://youtu.be/fBZXt2_U6Lg

Purpose of the 3rd Video / CHAPTER 3: As explained in the 1st Chapter, Abay type electric motor shows 94-95% efficiency values with its different winding technique ​​​​even its non-ferrous coreless model, which is the most efficient motor class in the world, IE5 Ultra Premium 2 horsepower motors. It has reached or even slightly exceeded the highest efficiency value of 93%.  One of the biggest reasons for its high efficiency value is that it uses high-power, very large-sized permanent magnets.  During the interaction of permanent magnets and electromagnets in the electric motor, a small amount of magnetic energy is released from the magnets.  Since this ratio is higher in this motor, when the net motor efficiency and losses are added up, more energy is released than the total electrical energy supplied, proving this.  Similar results were found in measurements repeated hundreds of times.  I will also try to resolve the question marks about the existence of magnetic energy obtained from the magnets in the heads by sharing a second method, which I found later, which anyone with intermediate electronics knowledge can do at home with an oscilloscope and a coil-magnet setup, in the videos in the next Chapter 4.  The blog page containing sections and details from the article I prepared on this subject can be accessed from the link.                          https://www.blogger.com/profile/11485463974354441270  

Here, in the 3. chapter, sample motor efficiency loss measurements were made live as evidence, while the loss measurement technique was explained and it was revealed that a little extra magnetic energy was released from the permanent magnets along with the losses.

Yorumlar

Bu blogdaki popüler yayınlar

WHY DON'T THE MAGNETIC MOTOR THAT WE CALL AS INFINITE ENERGY AND THE ELECTRIC MOTOR-GENERATOR SYSTEMS WHICH TURN EACHOTHER WORK? (ALL THINGS ON SOCIAL MEDIA ARE FAKE- FAKE.. )

Part 1: ABAY ELECTRIC MOTOR is only one with AXIAL and RADIAL INTERACTION at the SAME TIME

HOW CAN WE CALCULATE AND FORMULIZE THIS EXTRA ENERGY?